Smart Scene Controller  
  Product IPUcam  
  .Model No. IPUCam  
    Smart Scene Controller  
  .Function : a. Use the smart phone or computer to control consumer electronics devices, and can display a set of images  
    b. It can be connected to the Internet to remote control home appliances in anywhere anytime.  
  c. Almost Infrared remote control device can be controlled almost like TV, DVD, projectors, lighting, sound, curtains, etc  
  d. Built-in operational equipment TV, DVD, projectors, lighting, AMP, curtains, air-conditioning etc  
  e. Average about 3 minutes to learn a infrared remote control  
  f. Built-in 8 groups of scenarios, you can change it any time and setup time is not more than 2 minutes  
  g. After pressing the scenary button to automatically open or close the electrical equipment sequentially  
  h. Another provision of motion detection  
  i. Wireless mode will be easy in construction and much beauty  
    j. Remote control of home appliances has been patented in many countries  
  IPUCam Construction Chart      
Compression MPEG4 / JPEG
Resolution 720x480 30
Transmission / Speed 352x240 30
176x144 30
File Format MPEG-4/M-JPEG video  stream  with  2  way  16/24/32/40kbps ADPCM audio
Motion Detetion Movement on image
Digital Sensor
Controller Interface Internet Explorer 5.0 or above
Mobile Monitor System (Option)
Video setup via IE Support statistic and dynamic IP address
Compression rate
Pan/Tilt Control (support  PELCO-D、PELCO-P  System)
Audio on/off
Memory 2M Byte Flash ROM / 8M Byte SDRAM  /  32MB  DDR
Network 10/100 Ethernet
Wireless Wireless LAN 802.11b/g  (Option)
I/O Port Power input port、RJ-45 network port、Video inpout  Port、Audio I/O  port
、System Reset、RS-485 Control Port、Alarm I/O(4 IN, 3 OUT Option)
Dimensions 145mm(L)× 135mm(W)× 45mm(H)
Weight 450g
Power Supply DC +12V
Power Consumption 350mA(without wireless card)
Operating Temperature 5°C ~ 40°C
Storage Temperature 0°C ~ 70°C
Operating Humidity 10% ~ 80%